PDA

View Full Version : Bunch of Motherboards & a SCSI SCA backplane


Silly
03-23-2003, 11:10 PM
OK, doing a little house cleaning (garage cleaning actually, I'm not allowed to have this junk in the house)

Intel dual s370 1U server board - $80
ftp://download.intel.com/support/mo...rmk2/tpsv12.pdf
or here for more info:
http://support.intel.com/support/mo...srmk2/index.htm
Serverworks chipset, adaptec U160 controller dual intel 10/100 - (I actually have 2 of these, but I want to keep one, and 1 of them is missing part of the front panel connector: pg 49 in the pdf file. Basically without this you loose the power switch and the ability to hook up a proprietary LCD panel, which you might be able to use if you can figure it out... $80 is for the good board. If you want the damaged one (works fine) make me an offer.)

Intel 820 slot1 MB HP (ASUS OEM) 3 RIMM slots, 2 usable - 1 must have a CRIMM. Takes any slot1 CPU. - $40

intel i840 dual slot1 board. - $40
HP Kayak XU800 MB. This board is big. WATX I think. Onboard Adaptec U160, sound, memory riser w/ 4 SDRAM DIMM slots - takes up to 512MB registered DIMMs, or 256MB unbuffered. It as modified to fit in a rackmount case (gameport connector removed!)

Tyan Tiger 133 S1834 - $40
ftp://ftp.tyan.com/manuals/tiger/m_s1834_120.pdf
Dual slot1 VIA 694X chipset.

ABIT BE6-II slot1 BX board. - $40
http://www.abit-usa.com/products/mb/be6ii/

ABIT KT7A-RAID - $40
You know what this is.

ABIT BP6 - $1,000,000
I couldn't get rid of my baby!


HP (ASUS OEM) 440LX slot1 board - $10
(hell, if you really need this, just let me know and I'll probably give it to you.)

Intel PIII-800/133/256 slot1 cpus (qty 2) - $100 ea.
(these are hard to find, and they're $150 ea. on pricewatch...)

HP i820 DUAL MB - $60
HP (ASUS OEM) i820 daul slot1 MB. 3 RIMM slots, 2 usable 1 must have CRIMM. Board from a Kayak XM600. Very stable, used it for a year or so.


3 drive SCA backplane - $30
Made by ASUS. 3 SCA connectors on one side, spaced for 1/3 height (1") drives. 2 68 pin SCSI connectors on the other side, can be chained to another backplace, or has internal terminator. 1 molex power connector on back. U160 capable. Ask if you want to see pics. I have a few of these.

tim-ay
04-21-2003, 08:27 PM
hi, im interested in one of the SCA backplanes. and i would like to see some picts of them. o and are these SCA 40 or SCA 80?

Moddy
04-22-2003, 08:22 PM
I will vouch for Silly. He is a stand up guy and will stand by anything he sells.

If you have ANY doubts, let me know - I would be more than happy to be the "middle man". Heatware under "Modfather" ( http://heatware.com/eval.php4?id=642 )

:)

Silly
05-08-2003, 05:07 PM
Holy crap! I didn't even notice the 2 replies in here 'til now. If you're still interested I'll try and take some pics tonight. They are SCA-80 ultra 160 backplanes, made by ASUS. Pics later. Sorry for the delay...


BTW. Thx Mike.

Silly
05-08-2003, 09:02 PM
OK, this should work for the pictures: http://silly.homeip.net/sca Sorry about the delay in replying, I forget to check in here once in a while. Whon't let it happen again...

AczerX
05-31-2003, 04:15 AM
Silly,
I will be at the lan party.
I would like to get the ASUS oem 440lx boards.
Do you just have 1? could use 4>
probably to late, but figured i would try

AcZ- ;)

Silly
06-03-2003, 12:21 AM
Shit. I havn't been able to get into this section for a while. I didn't even see this post. I only have one, but it's yours. LMK if you're gonna be at the next one, or send me an email and let me know where you're at; maybee I could drop it off...